PROPSPEED
Foul-Release Coating for All Underwster Metals
Keep your running gear and any other underwater metals free of marine growth and protected against corrosion with Propspeed.
Propspeed, the original and best-performing foul-release coating in the industry, has been tried and tested around the world for over 21 years, consistently delivering customers the same result - improved boat performance, lower fuel, and operational costs, the sustained value of their investment, all while keeping the vessel’s running gear looking its best.
Thanks to our partnership with Sam Allen Wholesale, Propspeed is now available to you through SSAF Sheetmetal.
PROPSPEED KITS
With an ultra-slick topcoat, Propspeed is specially formulated to prevent marine growth from bonding to metal surfaces below the waterline. It is proven to increase boat efficiency, reduce drag and save fuel and maintenance costs. It features an exceptionally strong chemical and mechanical bond between the metal substrate, the Etching Primer and the Clear Coat– ensuring that the Propspeed coating actually sticks to your running gear and performs season after season.
Propspeed also reduces the risk of corrosion by electrically isolating the metal, as well as limiting the exchanges between the ions and the gases contained in the water and the metal. In short, if a reaction can’t occur, there will be no corrosion!
The Propspeed system is best used on propellers, shafts, struts, rudders, trim tabs, keel coolers, bow and stern thrusters, pod drives, sail drives, and other underwater metal.
Propspeed is now available at SSAF Sheetmetal thanks to our partnership with Sam Allen Wholesale.
LARGE KIT
Product Code: PSLKIT
LARGE KIT INCLUSIONS:
1 | PROPCLEAN
The denatured alcohol in Propclean ensures that the metal surface is now completely free of contaminants and ready for Propprep. The Propclean solution comes pre-packaged with 4 wipes in the kit to make your job easier.
2 | PROPPREP
Propprep is critical in the chemical preparation of the metal surface to be coated. The Propprep solution comes pre-packaged with 2 wipes in the kit to make your job easier.
3a&b ETCHING PRIMER BASE & HARDENER
This kit contains 2x 240ml Etching Primer Base and 2x 60ml Etching Primer Hardener. The Etching Primer is the origin of the radiant Propspeed Gold colour. Combined they are one of the best underwater Etching Primers on the market. Known best for its tenacious adhesion and corrosion resistance.
4 CLEAR COAT
This kit contains 320ml Clear Coat, a non-toxic topcoat which forms a super slick outer layer that marine growth cannot adhere to, improving speed and reducing fuel costs.
MEDIUM KIT
Top Seller
1 | PROPCLEAN
The denatured alcohol in Propclean ensures that the metal surface is now completely free of contaminants and ready for Propprep. The Propclean solution comes pre-packaged with 2 wipes in the kit to make your job easier.
2 | PROPPREP
Propprep is critical in the chemical preparation of the metal surface to be coated. The Propprep solution comes pre-packaged with a wipe to make your job easier.
3a&b | ETCHING PRIMER BASE & HARDENER
This kit contains 240ml Etching Primer Base and 60ml Etching Primer Hardener. The Etching Primer is the origin of the radiant Propspeed Gold colour. Combined they are one of the best underwater Etching Primers on the market. Known best for its tenacious adhesion and corrosion resistance.
4 | CLEAR COAT
This kit contains 200ml Clear Coat, a non-toxic topcoat that forms a super slick outer layer that marine growth cannot adhere to, improving speed and reducing fuel costs.
SMALL KIT
Product Code: PSSKIT
KIT INCLUSIONS:
1 | PROPCLEAN
The denatured alcohol in Propclean ensures that the metal surface is now completely free of contaminants and ready for Propprep. The Propclean solution comes pre-packaged with a wipe to make your job easier.
2 | PROPPREP
Propprep is critical in the chemical preparation of the metal surface to be coated. The Propprep solution comes pre-packaged with a wipe to make your job easier.
3a&b | ETCHING PRIMER BASE & HARDENER
This kit contains 96ml Etching Primer Base and 24ml Etching Primer Hardener. The Etching Primer is the origin of the radiant Propspeed Gold colour. Combined they are one of the best underwater Etching Primers on the market. Known best for its tenacious adhesion and corrosion resistance.
4 | CLEAR COAT
This kit contains 80ml Clear Coat, a non-toxic topcoat which forms a super slick outer layer that marine growth cannot adhere to, improving speed and reducing fuel costs.
PROPSPEED APPLICATION TIP
The process to apply Propspeed to your running gear isn’t difficult, but the process must be strictly adhered to in order to get a superior result. Failure to follow the instructions precisely will likely result in premature failure of the coating.
Ambient temperature has an effect on the application of Propspeed and the drying times of the Etching Primer and the Clear Coat. We recommend a minimum temperature of 10°C, 50°F. It is also recommended to avoid applying the product in direct sunlight or humidity above 85%.
The application of Propspeed requires planning. Make sure you have installed and taped over all zincs, all application gear is on hand, and you thoroughly understand the process – then you’re ready to get started.
Talk to the team at SSAF Sheetmetal about Propspeed products today.